3
、
INTAKE SYSTEM COMPONENT
19
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1224100-010000 ZT250
-
S swell nail
1
2
1244100-061000 ZT250 anti-water rubber of frame
1
3
1250105-018091 GB5789 M8×70
(
white zinc
)
1
4
4044201-256051 ZT310-v fender ball (dark grey matte)
1
5
ZT310
-
V right side cover
1
Fig.3 INDUCTION
SYSTEM COMPONENT
Maintain the filter element of the air filter
PROCEDURE:
●
Side cover
First remove the cushion, and then remove the expansion nail
⑴
at the connection between the right cover and
the tail skirt. Remove waterproof plug
⑵
and loosen bolt
⑶
with T12 sleeve without complete removal. Pull the
decorative ball
⑷
out and rotate clockwise, staggering the grooves on the right cover. Pull out the right cover in
the order of
①
-
②
-
③
-
④
.
●
Maintenance
The vehicle should be pushed to a dust-free or dust-free place before the rubber plug
⑤
of the air filter is
removed, and the filter core should be continuously blown into the air filter with a high-pressure air gun for 10 to
15 minutes, and then the plug should be covered back.
Blow the dirt out of the air inlet with a high pressure air gun, or use a cleaning device to extend the catheter into
and absorb the dirt.
CAUTION:
●
In the dusty environment, the frequency of cleaning or replacing the filter element needs to be increased.
●
Air filter is blocked by dust, which will increase the intake resistance, resulting in insufficient engine intake
and fuel consumption or engine damage.
●
The filter element or maintenance should be replaced every 10000km under normal conditions. After each
rapid maintenance, you can continue to ride or repair the filter after 4000km.
Содержание ZT310-V1 EURO V
Страница 1: ...2021 1 13 Service manual ZT310 V1 EURO V ...