4
、
REAR WHELL COMPONENT
29
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1184200-045000 DF30 wheel speed sensor
1
2
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
1
3
1251100-123093 Non standard M8×25(color zinc)
2
4
1250104-006097 GB16674M6×12
(
chromed/HH
)
4
5
1274200-119000 Single rocker rear flat fork tubing bracket
4
6
1224100-037000 0 grade flame retardant cable tie (black 3.6×295)
3
7
1251100-117093 Non standard hex socket bolt M8×25
5
8
1274200-058000 ABS gear ring(60T)
1
9
1100100-419000 ZT310
-
R1 rear disc brake plate
(
230×4.5
)
1
10
4024200-048000 ZT310 single rocker rear axle assem
(
with bolts)
1
11
1250305-002091 GB6187.1M8
(
white zinc
)
5
24N.m
12
1251100-191000 Non standard bolt M12×1.5×38 (color zinc)
5
after-sale
PROCEDURE:
●
Rear axle outer assembly
To remove only the rear axle assembly, simply use a 14# sleeve to remove the 2 bolts (3) and remove the
caliper from the mounting plate. Remove the rear axle assembly.
To replace the rear fork, you need to continue with the following steps:
Using 4# inner hexagon socket remove the bolt (2) and remove the wheel speed sensor (1) from the rear disc
brake caliper mounting plate.
Using 8# sleeve remove the 4 bolts (4) and remove the tubing bracket (5).
Cut the 4 straps (6) at the arrow indications, and find the inside of the left rear skirt and remove the joint of the
rear slab adapter cable. Locate the wheel speed sensor connector near the right air filter and remove it, and
remove the wheel speed sensor (1).
●
Rear axle assembly
Fix the bolt (7) with a 6# hexagon socket and then remove the nut (11) with a 14# sleeve.
Remove the induction ring gear (8) and the disc brake disc (9) from the rear axle assembly (10).
The rear axle assembly (10) already includes the rear axle and 5 bolts (12). The bolts (12) and the single rocker
rear axles have an interference fit. If the bolts are removed and replaced separately, the connection must be firm
and reliable, otherwise it may loosen and cause accidents. The bolt heads of the early production models are
round and can be replaced directly with the trimmed state of the later production.
CAUTION:
●
The replacement of the bolts (12) separately must be secure and reliable.
Fig.6 Rear wheel, swinging
arm component
Rear axle assembly
12
Содержание ZT310-V1 EURO V
Страница 1: ...2021 1 13 Service manual ZT310 V1 EURO V ...