Zontes ZT310-V1 EURO V, Руководство по обслуживанию

Страница: 57 / 110

6
、
COOLING SYSTEM COMPONENT 56
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251200-038093 Non-standard self-tapping screwST3.9×12 6
2 1224200-116000 ZT310-v radiator trim cover right rear part 1
3 1251300-063093 Plywood M6×11×15
（
color zinc
）
6
4 4044201-245052 ZT310-v radiator decorative cover front right 1
5 1224200-114000 ZT310-v radiator trim cover center 1
6 1224100-010000 ZT250
－
S swell nail 2
7 1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
3
8 1274100-057095 Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5 3
9 1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
3
10 1224200-115000 ZT310-V radiator trim cover left rear 1
11 4044201-244052 ZT310-V radiator trim cover front left (dark grey) 1
Fig.5 COOLING SYSTEM
COMPONENT
Radiator covercomponent 2
PROCEDURE:
●
Radiator decorative cover assembly
Using cross screwdriver Remove the self-tapping screws
⑴
, and pry the four snaps in the direction indicated by
the arrow to separate the right rear part
⑵
and the right front part
⑷
. Remove the 3 plywood nuts
⑶
from the
right front.
Remove the expansion pin after pressing the intermediate part of the expansion screw
⑹
.
Using 4# inner hexagon socket remove the 3 bolts
⑺
, remove the bushing
⑻
and the cushion rubber
⑼
and
remove the middle part
⑸
.
Remove the left rear part
⑽
and the left front part
⑾
of the trim cover by referring to the previous steps.
CAUTION:
●
Pay attention to the surface of the material.
●
When reassembling, be careful to first set the self-tapping screws perpendicular to the mounting surface and
not to use excessive torque.