Zontes ZT310-V1 EURO V, Руководство по обслуживанию

Страница: 106 / 110

13
、
MUFFLER COMPONENT 105
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc) 1
2 1251100-261000 Non
－
standard boltM10×1.5×127(Dacromet) 1
3 1251300-057093 Non
－
standard nut M10×1.5(dacromet) 2 65±5N.m
4 1251100-137000 Non
－
standard boltM10×1.5×100(Dacromet) 1
5 1251112-002093 M6×30 Hexagon flange bolts (color zinc) 1
6 1251112-003093 M6×45 Hex flange surface 9.8 bolt (color zinc) 1
PROCEDURE:
●
Muffler assembly
Remove the shroud assembly according to the step of "lower shroud assembly 1".
Referring to the steps in "Radiator Decorative Cover Part 1", remove the radiator decorative cover component
first.
using a 14# torx wrench remove the bolt
⑴
on the back of the shifter pedal rocker arm.
Remove bolt
⑹
with an 8# sleeve on the right side.
Use 14# torx wrench to fix the bolt
⑷
on the right side and use 14# torx wrench to remove the nut
⑶
on the
left.
Use a 14# sleeve to fix the bolt
⑵
on the left side and use a 14# torx wrench to remove the nut
⑵
on the right
side.
Remove bolt
⑵
and bolt
⑷
, and remove the left foot support.
Using a 8# sleeve remove the left main water tank bolt
⑸
.
Using a 8# sleeve remove the right main water tank bolt
⑹
.
Pull the radiator assembly open to facilitate subsequent removal of muffler nuts.
CAUTION:
●
The material should be protected during disassembly to prevent damage to the paint.
●
The muffler should be completely cooled before it is disassembled.
Fig .2 MUFFLER
COMPONENT
Muffler component 1