3-INTAKE SYSTEM COMPONENT
18
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251112-001093 M6×16 Hexagon flange bolts (color zinc)
2
2
1050956-006000 KD150-U EFI High Pressure Tubing Sub-assembly
1
3
1051468-007000 31.8×2 fluorine rubber O-ring
1
4
Intake manifold assembly
1
5
1051356-010000 Φ45×10 pipe clamp assembly
1
6
Throttle body assembly
1
7
1050968-003000 EV14 injector G06
1
8
1050968-002000 ZT1P58MJ injector holder
1
9
1250105-138093 GB5789M6×20 (environmental color)
1
10
1050956-005000 DLA-mini stepless motor 5mm
1
11
1050954-024000 CTS three-in-one sensor
1
PROCEDURE:
●
High-pressure oil pipe
Press the anti-trip buckle on the high-pressure fuel pipe
⑵
and then connect the oil pan to contain the remaining
fuel. Be careful not to let the fuel drip onto the bike body.Pay attention to protect the oil pump outlet pipe at the
arrow point
●
Throttle valve body assembly
Unplug the connector of the throttle valve body, remove the throttle cable and use an 8# wrench to remove the
2 bolts (1) Remove the throttle valve body assembly.
Remove the O-ring
⑶
, check carefully for damage before reinstalling.
Use a 10# sleeve to remove the bolt
⑼
and then remove the retainer
⑻
, and remove the fuel injector
⑺
.
After loosening the clamp
⑸
, remove the throttle valve body assembly
⑹
, and then remove the clamp
⑸
.
●
Throttle valve body after-sales parts
Throttle valve body assembly already contains stepper motor
⑽
and sensor
⑾
. Remove the 2 bolts and then
remove the clip, and then remove the stepping motor
⑽
; then remove the 2 bolts that fix the sensor to remove the
sensor
⑾
.
CAUTION:
●
First it need to remove the cushion,side cover,oil tank outside cover and liner,rear shock absorber and
electrical device box etc.
●
When removing the high pressure oil pipe,It is sure to operate until the engine and muffler are completely
cooled.
●
Fireworks, answering or dialing should be strictly prohibited near the car-breaking site to prevent accidents.
after-sales
Fig.2 INDUCTION
SYSTEM COMPONENT
Throttle valve body component
