11-REAR COVER COMPONENT
83
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1250104-006097 GB16674M6×12 (chromed/HH)
2
2
4021200-023000 KD150
－
U battery holder
1
3
1240300-007000 HJ125
－
6 Battery rubber gasket
3
4
1251100-102000 Non
－
standard bolt M6×16 (304 stainless steel)
2
5
1274100-057095 Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
2
6
1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1)
2
7
1244100-002000 ZT250
－
S Side cover round rubber
4
8
1221200-046000 KD150
－
U skirt bottom part
1
9
1244100-079000 ZT250
－
R left electric device box rubber
1
10
1244100-080000 ZT250
－
R right electrical device box rubber
1
11
1251200-033093 Non
－
standard self-tapping bolt ST4.2×12(color zinc)
2
12
1171200-056000 KD125
－
U tail light
1
PROCEDURE:
●
Skirt bottom part component
Using 8# sleeve remove the bolts
⑴
on both sides of the head; check that the tail light plug, start relay, and fuse
box have been unplugged from the bottom of the rear cover, and then pull down the components to remove.
Take off 4pcs round rubber
⑺
,the electric device box rubber left rubber
⑼
and right rubber
⑽
.
Using 5# inner hexagon socket remove bolt
⑾
from the tail light
⑿
.
Using 4# inner hexagon socket remove bolt
⑷
,take off the bushing
⑸
and the cushion rubber
⑹
,take off the
battery bracket component.
The battery rubber pad is a double-sided adhesive glued to the battery holder
⑵
and the bottom of the rear
cover
⑻
.
CAUTION:
●
The parts should be protected during the disassembly process.
●
When reassembling, first check if there is any pressure on the wire to prevent short circuit when tightening
the bolt.
●
You can watch the detailed operation in "KIDEN official websiteassembly video KD150-U, U1 rear cover
and rear light disassembly instruction video".
●
When assembling self-tapping screws must be perpendicular to mounting surface, otherwise it will
bedamaged,and the torque should not be too large.
Fig.4 REAR COVER
COMPONENT
Skirt bottom part component 2
