7-FRONT FORK COMPONENT
56
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non
－
standard bolt M6×16(304 stainless steel)
2
2
1251100-121093 Non
－
standard bolt M6×25 (environmental color)
2
3
1224100-010000 ZT250
－
S swell nail
2
4
1250205-031091 GB70.1M6×30(stainless steel)
1
5
1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc)
1
U1
车型
U
车型
U
U1
Head and headlights component
PROCEDURE:
●
Head assembly
Using 4# inner hexagon socket remove 2pcs bolts
⑴
on the bottom.
Using 6# inner hexagon socket remove 2pcs bolts
⑵
.
Using 4# inner hexagon socket to press down the center of the expansion pin
⑶
and remove it.
Grasp the two turn signals and turn the head assembly forward.
Unplug the headlights, position lights, and turn signals. Use 5# hex socket to remove bolt
⑷
for U model, and
8# sleeve for U1 model to remove bolt
⑸
.
After confirming that all the plugs are unplugged, remove the headlight assembly.
CAUTION:
●
Pay attention to the force when removing the cable and unplugging the plug and the cable to avoid damage.
●
The head unit should be supported during the disassembly process and protective measures should be taken
toprevent scratching the lamp cover or paint surface.
●
You can watch the detailed operation in "KIDEN official website assembly video-KD150-U1, U headlight
disassembly and assembly instruction video".
●
When reinstalling, pay attention not to insert the wrong wire color of the light.
●
Figure a is the unmounted state; Figure b is the assembled state; Figure c is the disassembled state.
Fig.13 FRONT FORK
COMPONENT
