共
50
页
第
28
页
Page 28 of 50
1
、
定位板弹簧断裂
Breakage of locating plate spring
1.
水泵齿轮或叶轮有故障
Faulty water pump gear or impeller
2
、
变速轴与曲轴箱盖相干扰
|
Interference between variable shaft and
crankcase cover
右曲轴箱盖拆卸
Removal of Right Crankcase Cover
1
、
先将机油放干（拆下发动机左侧的机油滤网
盖，取出箱体里的机油滤网组合，或拆下底
部放油螺栓，等待箱体里的机油流完为止）；
Firstly, discharge the engine oil completely
(remove the oil screen cover on the left
side of engine and take out the oil screen
assembly, or remove the bleeding bolt on
the bottom and wait until the oil is
completely discharged);
2
、
拆下
10
颗
GB16674
小盘螺栓
M6×40
，
1
颗
GB16674
小盘螺栓
M6×50
，
Remove the 10 small GB16674 M6×40
pan-head bolts and 1 small GB16674
M6×50 pan-head bolt.
3
、
最后取下右曲轴箱盖，密封垫、
2
颗定位销
Finally, remove the right crankcase cover,
sealing gasket and 2 dowel pins.
离合器拆卸
Removal of Clutch
1
、
依次取下离合器推杆、轴承
16003
Remove the clutch pushrod and bearing
16003 in sequence.
机油滤网盖
Oil screen cover
放油螺栓
Bleeding
bolt
M6×50
带垫片
M6×50 bolt with
washer
推杆
Pushrod
轴承
Bearing
