24
Adjusting Set Points
The Heat or Cool set points are displayed at the bottom of the screen. To adjust the set points, tap on the heat-to
or cool-to temperatures; the set points will be displayed on the screen.
Use the and arrows over the flame/snowflake icons to set the desired heat and cool set points.
Tap to save changes
Changing Mode
The thermostats are auto changeover, but specific modes may be selected. Heat/Cool mode is the default.
System Heat/Cool
- Tap on , select “Heat/Cool”. Tap to save changes
System Heat Only
- Tap on , select “Heat Only”. Tap to save changes
System Cool Only
- Tap on , select “Cool Only”. Tap to save changes
System Off
- Tap on , select “Off”. Tap to save changes
Override Operation
When the thermostat displays the unoccupied icon a 2-hour temporary override may be initiated by tapping
the “Override” will appear. When additional override time is required, tap the unoccupied icon again.
SATouch CONFIGURATION AND OPERATION
Display Temperature Calibration
Thermostats are calibrated at the factory and should require no further adjustment. However, the display space tempera-
ture may be field calibrated by the following procedure:
To access the Thermostat Configuration Menu: Tap
While in Thermostat Configuration Menu, Select
Calibrate Display
Use the and arrows to calibrate the thermostat display to a external temperature probe temperature reading.
Tap to save changes, to return to the home screen tap
