11
Current Room
Temperature
Modes
Cool Set Point
Menu
Duct Temperature
Heat Set Point
Addressing Zone Thermostats
EzTouch CONFIGURATION
Every thermostat in the system needs a unique ID ranging from 1-17. They must be in numerical order the way the
communication wire is daisy chained. Confirm no duplicate addresses.
To set the stat’s ID access the Advanced Configuration menu by tapping on the degree symbol next to the room
temp . The degree symbol will change from white to green and then tap
Once in the Thermostat Advanced Menu, Select
SET ID
Use the and arrows and set the new ID ranging from 1-17
Tap to save changes, to return to the home screen tap
Select Damper Type
The EzTouch needs to be configured for the type of damper that it is wired to. There are 4 options, round,
rectangular or spring loaded.
To set the stat’s ID access the Advanced Configuration menu by tapping on the degree symbol next to the room
temp . The degree symbol will change from white to green and then tap
While in Thermostat Configuration Menu, Select
Damper Type
Select round, rectangular or spring loaded damper operation
Tap to save changes, to return to the home screen tap
Active Heat Call when Soild
In standby when Flashing
MENU
OCCUPIED
UNOCCUPIED
MENU HOME
HOME
Active Cool Call when Soild
In standby when Flashing
