ZOJE A9200L-D4-W-CP, Руководство по эксплуатации

Страница: 12 / 65

开机前的注意事项
1. 机头装箱前为了防止机件生锈,在 均涂有较厚的防锈油脂,同时机头装箱后,还可能 外露部分
在较长的贮藏和长途运输阶段造成油脂硬化和在机器表面积聚灰尘,所以必须将表面的油脂
和灰尘用汽油和洁净的软布擦拭干净。
2. 机器出厂时，虽经过周密的检查和试验，但在长途运输中也可能受到强烈的震动使机
件松动或歪曲，所以应该做一次周密的检查，并用手转动上轮，看机件之间有无转动困难、
碰撞现象或其它不均匀的阻力，不正常的声响，如有应作适当的调整，机器状态正常后才可
正式试车。
3. 油盘内机油液面高度没有在正常范围内绝不能开车。
4. 机器运转时，上轮转向应该是逆时针方向（从上轮外侧面看）。
5. 确认电控铭牌上所标电压及相位是否正确。
6. 生产日期见合格证。
Precautions Prior to Startup
1
1. The machine head is coated with a thick layer of rust-prevention grease before
encasement,andtheencasedmachineheadmaypossiblybesubjectedtogrease
hardeninganddustbuilduponthemachinesurfaceinprocessoflongstorageand
long-haultraffic;therefore,takecaretoremovethegreaseanddustfromthesurface
usingsoftclothandgasoline.
2. Though the machine was inspected and tested with care before factory leaving, it
mightbeaffectedbyviolentvibrationresultinginloosenessordistortionofthemachine
parts;thereforetheoperatorshallthoroughlycheckthemachine,turntheupperwheel
byhandandcheckitfordifficultyinfreerotation,slightimpact,andotherunevenresisting
forceorabnormalnoises,andmakeappropriateadjustmentifanytorestorethemachine
statebeforeformaltrialrun.
3. Never start up the machine if the oil liquid level in the oil box falls outside the normal
range.
4. The upper wheel shall rotate counterclockwise (when it is viewed from the lateral
surfaceoftheupperwheel)whenthemachineisoperating.
5. Check whether the voltage and phases indicated on the electric-control data plate
arecorrect.
6. The date of manufacture is indicated on the certificate of conformity.
使用注意事项
Precautions for Use
2
1. 当接通电源或机器运转时，请勿将手与机针接触。
2. 机器运转时,请勿将手指伸入挑线杆防护罩内。
3. 操作者用手送料时,请勿将手指伸入护针架。
4. 机头翻动及拆后盖时,一定要切断电源。
-3-