Zodiac NOOSA REEF, Инструкция по эксплуатации

Страница: 6 / 64

INTRODUCTION
4
INTRODUCTION
Congratulations on the purchase of your new Zodiac pool.This pool is the product of more than thirty years continuous
development.The pool installation procedure has been set out in easy to follow step by step instructions with illustrations.
Please take the time to read your owners manual thoroughly before and during installation of your pool.Your warranty will be
void if the procedures in this manual are not followed. If you are having your pool installed by a professional installer it is your
responsibility to inspect the work at all stages to ensure that each step being undertaken complies with ALL instructions. Please
also read and follow the instructions relative to all accessories, i.e. pumps and filtration prior to installation.
IMPORTANT POINTS
LOCAL REGULATORY BODIES
When installing a new pool, you must comply with your local safety regulations and codes. As these regulations vary from
council to council it is a must that you check with your local council what the requirements for your site are, i.e. fencing
requirements. COMPLYING WITH LOCAL REGULATIONS AND CODES ARE YOUR RESPONSIBILITY.
CONTRACT INSTALLATIONS
Proper installation procedures are essential to ensure the best performance and durability of our pools in service. Zodiac are
not affiliated with any pool installers and we cannot accept any responsibility for problems caused by incorrect installation
procedures. It is strongly recommended that only reputable licenced and insured professional installers undertake the work
ensuring that it complies with the instructions contained in this manual. (not applicable in all states)
BEFORE YOU START
Before attempting pool installation, please make yourself familiar with the DVD and this manual. Make sure that the instructions
relate to the correct pool.Take the time to study the step by step procedures; an extra half an hour now could save
complications later on.
Allow plenty of time for installation, start early in the day.The installation process is made up of six defined stages.
1. Site selection
2. Site preparation
3. Frame installation
4.Wall installation
5. Liner installation
6. Skimmer box installation
Great care should be taken with all stages. If the site preparation and cross channel installation are not done with care and/or by
following the instructions contained in this manual the structural integrity of your pool may be reduced.
Take time, check and re-check.
Check lists can be found at the start of each frame installation section. Do not commence installation with parts missing.
Ensure that you have all the required tools on hand before commencing and make sure that you have help on hand at all times.
IMPORTANT
This pool has been designed and engineered (which complies with an approved engineer certificate). Installation of the
pool should be as shown in the assembly manual. Any deviation from this manual could cause serious injury and void warranty
of the pool.