manualshive.com logo in svg

Zodiac NOOSA REEF, Инструкция по эксплуатации, Страница: 4 / 64

Поделиться
Скачать
Zodiac NOOSA REEF Скачать руководство пользователя страница 4

CUSTOMER LETTER

2

Dear Customer,

Congratulations! You are now the owner of an innovative Zodiac swimming pool that will allow you to make the most
of your summer.These instructions will help you easily and correctly install your Zodiac modular pool. Read them
carefully and make sure you understand them before you proceed. Before you begin, here is some additional
information that will help you through the installation process: Finding the right location for your pool is of the
utmost importance.To find the right spot, you must ask yourself a number of questions. How far is the property line?
Are there electrical lines overhead or underground? What about telephone lines, or gas and water pipes? You must
also consider the slope, soil composition and drainage on your property as well as the climate, prevailing winds and
available sunlight.

Minimum bearing capacity of ground under pool is to be 80k Pa.This may need an engineers soil test to verify.
Unstable soil may result in the pool moving and not remaining level.

Before commencing the installation of your pool, ensure that you have complied with council requirements and
obtained the necessary council permits.

Installation requires a minimum of 2 people and the amount of time varies according to the size and model of the
pool you have. However, it generally takes about 8 hours for an oval pool (not including the time required to prepare
the site and fill up the pool).

We also suggest installing your pool on a sunny and windless day. Installation of the liner on a warm day will make it
easier to fit.

Before starting to use your pool, it is important to know all about water treatment.We also recommend that you
check the fastenings (bolts and screws) every year to make sure that all of the parts are in good shape.

Ensure that the water level in your pool is maintained at the correct level for safe operation of the filtration system.
Never leave your pool empty.This can result in severe damage to your pool liner.

Never dive or jump into a modular pool and never walk or sit on the top deck as it is very dangerous and serious
injuries may occur. Failure to adhere to instructions concerning maintenance, safety, assembly, start-up and use could
pose serious health risks, especially to children.Your pool is designed to provide years of enjoyment, as long as it is
carefully and correctly installed and maintained. Read and make sure you understand the instructions before you start.
Work step by step, and take your time.

If you encounter any problems during installation or if you require additional information, please contact the Zodiac

retailer/dealer 
or contact Zodiac Group Australia Pty Ltd 
by phone 1800 229 526 or by fax 61 2 9757 2860

Happy swimming!

POOL WARRANTY  REGISTRATION

Your pool is warranted by Zodiac Group Australia Pty. Ltd. It is advisable to register your pool within 30 days of purchase.
Complete and return your pool warranty registration card to Zodiac Group Australia. If you did not receive a warranty
registration card you can register your warranty online at http://www.zodiac.com.au or contact your pool dealer.

POOL CARE

Like a car your pool will remain looking its best if washed occasionally.As water is splashed out of your pool onto the decks,
verticals and wall, the water will evaporate leaving behind deposits of concentrated salts.This can be prevented by washing your
pool with soapy water then rinsing with fresh water to remove all the salts from the metal components of your pool, even
underneath the decks (rinsing with fresh water will help, but soap will give a better result).

Содержание NOOSA REEF

































































Отзывы:

Нет отзывов