Zodiac NOOSA REEF, Инструкция по эксплуатации

Страница: 52 / 64

ASSEMBLY OF TOP DECK
50
2
1
A
— alignment notch
Arrow see below
A
B
C
C
B
A
Outside of wall
A
STEP 41.
16 mm
B A
STEP 42.
Model 2012 2412 2315 2715 3015 3815
Size 3.66 x 5.94 m 3.66 x 7.08 m 4.57 x 6.85 m 4.57 x 7.99 m 4.57 x 9.13 m 4.57 x 11.41 m
13 15 17 19 15 23
E-Z Lock
Going in a clockwise direction, install a long top deck (round section) on a short top deck.To make it easier to locate the interior alignment slots while you are installing
the top deck, alignment notches have been added close to each pin (male part of the top deck) (illustration 1).
These notches will help you locate the central alignment slot corresponding to each pool size. Simply move the arrow on the interior of the top deck cap (illustration
2) towards the appropriate notch (A). Repeat these operations to complete the top deck installation of the round section of the pool.
NOTE: Standing on the outside of the pool, line up the left hand notch with the arrow on the top deck.
To make the pieces fit together, you may have to use the adjustment points provided for this purpose and move the top deck to the left or right. In this case the
top deck should be moved approximately 16mm to the left or the right (illustration A) to ensure that upright is levelled and situated in the middle of the top deck
hole. See step 39. Screw the top deck in place with the EZ-lock system (illustration B). Repeat these operations to complete the top deck installation.
A = 12’ = 3.66m 3.66m x 7.08m; 3.66m x 5.94m; 4.57m 7.99m;
4.57m x 9.13m; 4.57m x 6.85m; 4.57m x 11.41m