Zodiac 7004 .N, Инструкция по эксплуатации

Страница: 4 / 79

6 7
Please note:
Before using the chronograph functions, please ensure that:
- the crown is in position I (= normal position).
- the two chronograph hands are precisely at zero position following
activation of pusher B. Should this not be the case, the position
of the hands must be adjusted (see the chapter entitled “Adjusting
the chronograph hands to zero position”).
Chronograph: Basic function
(Start / Stop / Reset)
1 . Press pusher A to start the center stop-second hand .
2 . To stop the timing, press pusher A again .
3 . To reset the two chronograph hands to zero positioning, press
pusher B .
Chronograph: Intermediate or interval timing
1 . Press pusher A to start the center stop-second hand .
2 . To stop the hands and display the interval time, press pusher B .
Note: Although the chronograph hands have stopped, the
movement continues to record the current timing.
3 . Make up the measure time:
Press pusher B again and the 2 chronograph hands are quickly
advanced to the ongoing measured time . To continue to record
intervals, continue to push pusher B .
4 . Press pusher A to stop and the final time is displayed .
5 . To reset the two chronograph hands to zero positioning, press
pusher B .
Crown
Pusher A
Pusher B
12
30
I II III
15
6
9 3
1
2
6
Minute hand
Crown
Pusher A
Pusher B
12
30
I II III
15
6
9 3
Hour hand
Crown
Pusher A
Pusher B
12
30
I II III
15
6
9 3
Small minute counter
Small hour counter
Pusher C
Center stop-second
Adjusting the chronograph hands to zero position
1 . Pull crown out to position III (the two chronograph hands are in
their correct or incorrect zero position) .
2 . Keep pushers A and B depressed simultaneously for at least 2
seconds (the center stop-second rotates by 360° - corrective
mode is activated) .
3 . Press pusher A to single step the center stop-second hand .
Press and hold the pusher A to advance to the center stop-
second hand quickly .
4 . Press the pusher B to advance to the next hand .
5 . Press pusher A to single step the minute counter hand . Press
and hold pusher A to advance the minute counter hand quickly .
6 . Return the crown to position I .
Light (only on some models)
1 . Press pusher C on the left side of watch case .
2 . Release pusher C and the light will glow up for about 5 seconds .
3 . After 5 seconds the light will fade out automatically .
Crown
Pusher A
Pusher B
12
30
I II III
15
6
9 3
1
2
6
Minute hand
Crown
Pusher A
Pusher B
12
30
I II III
15
6
9 3
Hour hand
Crown
Pusher A
Pusher B
12
30
I II III
15
6
9 3
Small minute counter
Small hour counter
Pusher C
Center stop-second