Zmotion ZMC408SCAN, Руководство пользователя

Страница: 42 / 88

ZMC408SCAN Motion Controller Hardware Manual V1.5
Note:
➢ 5 V power supply only supplies for handwheel, don’t supply power for others.
➢
All signals of this interface are digital input signals, number is IN (32-43).
3.10.1. MPG Handwheel Interface Specification & Wiring
→ Specification
Item IN (32-43)
Mode (input) NPN leakage it is triggered when low electric inputs.
Frequency (input) <5kHz is recommended
Impedance (input) 510Ω
Max voltage (input) 24V
The current to open (input) <2.8
The current to close (input) >2.9A
Min current (input) -1.8mA
Max current (input) -5.5mA
Isolation optoelectronic isolation
5V power supply (H-5V,
EGND) max output current
100mA
→
Wiring Reference