ZIGOR SOLAR HIT3C, Руководство по эксплуатации

Страница: 80 / 116

Operating Manual ZIGOR SOLAR HIT3C
20 © ZIGOR
o
Active

“R”
o
Not active but not reset

“R!”
4.4.3 Measurements
This menu presents the following information:
•
PV Input:
o
Cell Power

Instantaneous power supplied by the renewable resource.
o
FV Voltage

Voltage at the renewable input.
o
Current

Current at the renewable input.
o
Isolation resistance

Isolation resistance value. Value used to generate the isolation alarm.
•
Battery:
o Battery Power

Instantaneous power in the battery branch.
o
Battery Voltage

Voltage in the battery branch.
o
Battery Current

Current in the battery branch.
o
Ah Meter

Current Ah meter of battery.
•
Unit:
o Unit Power

Instantaneous power supplied by the emergency generator.
•
AC output:
o Output Power

Total instantaneous power supplied to loads.
o R Phase Power

Instantaneous power in R phase supplied to loads.
o
S Phase Power

Instantaneous power in S phase supplied to loads.
o
T Phase Power

Instantaneous power in T phase supplied to loads.
o R Phase Output Current

R Phase Current.
o S Phase Output Current

S Phase Current.
o T Phase Output Current

T Phase Current.
•
Temperatures:
o
Temperature Inside Cabinet

Value for temperature inside the cabinet.
o
Ambient Temperature

Value for the inlet air temperature for cooling.
o Radiator 1 Temperature

Value for temperature in radiator 1.
o Radiator 2 Temperature

Value for temperature in radiator 2.
o Transformer Temperature

Value for temperature of the output transformer.
4.4.4 Status
This menu presents the following information:
•
Inverter status
•
Start/Stop switch
•
Protections
o
AC Overvoltage protection
o
DC Overvoltage protection
o
General switch
o
Inverter door
o
External alarm
4.4.5 Configuration
In order to modify the parameters of this menu, it is necessary to modify the access level to Advanced access. This
menu presents the following information:
•
Date and time
•
IP Address
•
Network mask
•
Gateway
•
Level change (password)