ZIEHL-ABEGG ZETADYN 1DV Series, Описание системы

Страница: 30 / 69

Operation and settings 25
Example of setting the parameters
In menu /TRAVELLING, the speed V_3 is to be changed (see figure 4.3).
1. Once the supply voltage has been applied to
the controller circuit board, the following will
appear on the LCD display:
2. Press any key to make the MONITOR menu
appear on the display.
3. Press the key [
↓
] to scroll to TRAVELLING
menu.
4. Activate the list of parameters by pressing
(P). The first parameter V_1 will appear on
the display.
5. Press [
↓
] to scroll to parameter V_3.
6. Press [P] to activate the setting box. An
arrow will flash on the left, in the second line.
Parameter explanations will be replaced by
the setting box.
If no changing-over to the setting field is
effected, the input is already protected by a
password (see 4.3.8).
7. It is possible to change the value by means
of the key
[↓]
or
[↑]
.
8. Acknowledge the value in the setting box by
pressing [P]. The setting value will change up
on the display. The new value will be
accepted.
The arrow stops flashing and the parameter
explanation reappears in the second line.
9. Press [
↓
] and [
↑
] simultaneously when the
TRAVELLING menu will appear on the
display again.
60 minutes after the last key has been actuated, the start indication automatically appears.
Furthermore, the lighting of the display is switched off.
Figure 4.3 Example for parameterization
ZIEHL-ABEGG
ZETADYN 1DV
ZIEHL-ABEGG
ZETADYN 1DV
MONITOR
*********
DIST. & TIMES
*********
STATISTIC
********
TRAVELLING
************
&
selection of a menu
selection of a parameter
change of the parameter
P
P
V1 0.050 m/s
>Position
V_2 0.70 m/s
>Inter
V_3 1.20 m/s
>Travel speed
V_3 1.20 m/s
>..............1.19 m/s
any key
402