ZIEHL-ABEGG UNIcon MODBUS Master CXE/AV Скачать руководство пользователя страница 86

Страница: 86 / 114

9.12.4

Enter switching times
Two

switching times can be entered for the same function (e.g.

= Limit) for each weekday. The

menu items are repeated for each weekday with two on- and off-times each. Switching times are not
preprogrammed at the factory.
In order to make con

ﬁ

guration easier, the same switching times can be made for several days in a

block. To prevent unwanted switching times from arising, all should be deleted before programming.
To do this, select the block

Mo - Su

and deactivate all 4 switching times.

Be sure to delete all switching times before carrying out complete new settings.

Sequence

Timer

9 x

▲

Timer

3 x

Timer

Mon

Mon-Sun

- - - - -

Mon-Sun ON1

- - - - -

Mon-Sun OFF1

[P]

[ESC]

[P]

[ESC]

[P]

[ESC]

[P]

[ESC]

Factory setting

ﬁ

rst week-

day *

All weekdays selected

First switch-on time for all
weekdays.
Display:

- - - -

= no

switching times pro-
grammed yet.

The

ﬁ

rst switching times

for all weekdays are now
deleted.
Then the

ﬁ

rst switch-off

time for all weekdays is
displayed.
Now delete all other
switching times in the
same way.

If switching times are already programmed for all weekdays

“

Mon-Sun

”

, press the P key and increase the hours with the

▲

key until the deactivation appears after

“

”

, display:

- - - -

. Then press the P key twice to con

ﬁ

rm and delete the switching

times.

All programmed switching times are deleted after loading the factory setting or resetting the mode.

Operating Instructions

UNIcon MODBUS Master

Programming

L-BAL-E207-GB 1723 Index 003

Part.-No.

86/114

Содержание UNIcon MODBUS Master CXE/AV



















































































































Результаты поиска

Содержание UNIcon MODBUS Master CXE/AV

Отзывы:

ZIEHL-ABEGG UNIcon MODBUS Master CXE/AV, Руководство по эксплуатации, Страница: 86 / 114

Результаты поиска

Содержание UNIcon MODBUS Master CXE/AV

Отзывы: