Zero88 FROG 2, Руководство по эксплуатации

Страница: 87 / 184

Programming
Frog 2 Operating Manual – Issue 4.3 Page 87
Smart Tags
There is a [Smart Tag] button displayed in the Program Window:
In normal desk operation, only those channels which are tagged in the Program Window
will be recorded into the cue, UDF, UDK or palette.
Smart Tags remove the need for you to work out which channels should or shouldn't be
tagged in a state. As such, they can be used to build states using submasters and other
playback elements.
When the RECORD key is pressed the state on stage is what will be recorded, regardless
of whether or not a dimmer channel or fixture parameter is tagged in the Program Window.
Put simply, with Smart Tags enabled, you no longer have to think about Tracking. The
desk will insert whatever tracking is required to make your show work - including ignoring
fixtures whose intensity is set to 0% to enable Move On Dark to fully function.
To switch on Smart Tags – click on the [Smart Tag] button in the Program Window.
Use Smart Tags in combination with Cue Only to create inserted cues that don't affect the
rest of the cue stack, for example an added blackout in the middle of a scene.
The Command Line
All commands (intensity commands, wheel movements, manual tagging etc) are recorded
and displayed on the command line of the touch screen.
The commands may be undone, one at a time using the backspace key ( ) on the
numeric keypad. Each press of the backspace key undoes one command until you reach
the original group selection command.