Zero88 FROG 2, Руководство по эксплуатации

Страница: 40 / 184

Setup
Page 40 Frog 2 Operating Manual – Issue 4.3
Patch
The Patch option allows you to assign fixture types, patch them to the DMX outputs, adjust
parameter default, highlight and topset values, adjust fixture alignment values (pan/tilt
reverse and swap) and a number of other associated functions.
Adding Fixtures
The first task you need to perform is to assign the fixtures in your rig to the desks fixture
schedule. This tells the desk how many of each fixture type you have, allowing the desk to
load the correct fixture profile details into its memory.
Press the [Add Fixtures] key on the touch screen. The Fixture Schedule Window is
displayed on the touch screen:
The left hand column in this window allows you to select the fixture manufacturer.
Scroll down or use the cursor keys to select the required manufacturer (eg MARTIN).
Press the right arrow key to move the cursor to the fixture list in the right hand column.
Scroll down or use the cursor keys to select the required fixture type (eg MAC 500).
Press the SET key, enter the quantity of the fixture required (eg 4), then press ENTER.
Repeat the above procedure for all the other fixtures in your rig.
When you have finished adding all the fixtures you require to the schedule, press the [OK]
key on the touch screen. The touch screen returns to the Patch screen.