Zero88 FROG 2, Руководство по эксплуатации

Страница: 31 / 184

Quick Start Tutorial
Frog 2 Operating Manual – Issue 4.3 Page 31
Cues
Once you have set up a look that you like you can then record that state into a cue.
If you wish to see the cues as they are recorded then display the Cue Stack Window on
one of the monitor screens. Press the [Cue Stack] key on the touch screen.
Selecting a Cue Stack
Cues can be programmed into any of the 1000 user programmable cue stacks.
Select Page 1 on the playback master section, using the PAGE+ and PAGE- buttons.
Press the Stack SELECT button above the cue stack you wish to program. The LED in
the SELECT button illuminates to indicate that it is the active cue stack.
Recording a Cue
To record the tagged parameters into the next available whole cue number on the selected
cue stack, simply enter the following command:
RECORD ENTER
If you wish to record the fixture data to a particular cue rather than the next available cue,
then enter the following command:
RECORD N ENTER (N = Cue Number)
If you wish to record the fixture data to a particular cue stack and cue number rather than
the next available cue on the selected stack, then enter the following command:
RECORD S/C ENTER (S = Stack No, C = Cue Number)
After recording a cue, the command line on the touch screen is cleared, the fixtures remain
selected but the parameters are untagged.
Subsequent cues can then be set up and recorded using the same method.
As you become more experienced with the desk, you will find the most efficient way of
programming your cues.
Note – Record Options Window
When you press the RECORD key the Record Options Window is displayed on the touch
screen. This window allows you to adjust what data is recorded, as required – see the
Programming chapter for further details.