ZepSolar Zep System I, Руководство по установке

Страница: 8 / 56

ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc. PAGE 4 OF 50
The Ground Zep rotates into the module groove with a quarter turn and provides a ground bond
connection from the array to the equipment grounding conductor(s). Only one Ground Zep is
required per sub-array and can be installed anywhere on the perimeter of the array.
Precise Component Mating
Zep System I uses the
grooves in Zep-compatible
PV modules to easily and pre-
cisely mate with Zep compo-
nents. The Key side of
Interlocks, Hybrid Inter-
locks, and Cam Feet (A) lock
into the grooves of Zep-com-
patible PV modules. The
Tongue side of these compo-
nents (B) receive adjustable
drop-in connections. As a
rule, the Tongue side always
faces the direction of the next
module to be dropped in; it
“receives” the next module.
Adaptability
Installers often need to
mount
a perfect-looking
array on an imperfect struc-
ture using imperfect PV modules. Roofs are often neither square nor perfect planes, making it
difficult to establish reference points for orienting each module. Also, each PV module may have
slightly different dimensions because of manufacturing tolerances. Conventional systems com-
pound slight module misalignments or dimensional deviations throughout the array. The larger
the array, the more difficult it is to counter this problem.
A B A B