ZepSolar Zep System I, Руководство по установке

Страница: 29 / 56

ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc. PAGE 25 OF 50
4.8 - STEP 8: Installing the Next Rows
8-A: Add the remaining rows of modules.
Repeat Steps 5 through 7 for the
remaining rows of modules.
Adjust module truing (X-Y axes) and
leveling (Z axis) as you go as described
in Step 8-B for a square, level array.
Proceed to Step 8-C when you reach
the final row of modules.
8-B: Adjust module truing and leveling as you go.
Please refer to Section 1.3.
8-C: Install Spanner Sleeves and Cam Feet on top row Spanner Bars.
Install the Cam Foot on the Module
(1).
Slide a Spanner Sleeve onto the Span-
ner Bar splice until flush (2).
Push the Spanner Sleeve and Splice
forward until Spanner Sleeve is under
Cam Foot (3). Use a hammer if needed.
Secure the Cam Foot (4).
X-Y
Z
1 2
3
4