ZepSolar Zep System I, Руководство по установке

Страница: 26 / 56

ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc. PAGE 22 OF 50
5-D: “Drop in” module onto front Cam Feet and Interlocks.
Press the module forward while lower-
ing it to the plane of the roof (0
degrees) to fully engage the Cam Foot.
If the module does not fully seat, raise
it slightly (4-5 degrees) and press for-
ward again while lowering.
5-E: Add rear Cam Feet.
Engage the Key side of the Cam Foot
with groove in module then rotate into
position. (See Step 3-E.)
The Cam Foot will snap into place
when properly installed.
Secure Cam Feet to Spanner Bar using
the Flat Tool as described in Step 3-F.
5-F: Ground the Array.
Add a Ground Zep to the outside mod-
ule edge and connect to building
ground. (See Step 9).
2 1 3