ZepSolar Zep System I, Руководство по установке

Страница: 43 / 56

ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc. PAGE 39 OF 50
Removing Interlocks
Installing Cam Feet
Interlocks can be used for thermal joints at Position #2.
If your array requires thermal expan-
sion joints (refer to the installation
instructions and site design docu-
ments), the Interlocks forming the
joint secure at Position #2.
CAUTION: Do not over- or under-
tighten. Turn to Position #2 exactly.
Turn fasteners to Position #1 to remove Interlock.
Place the Zep Tool over the fastener at
Position #3 or #2 as appropriate, and
then turn CCW to Position #1.
Remove the Interlock using a Flat Tool
as described in the installation instruc-
tions and in Section 6.2.
Rock Cam Feet into place in module grooves.
Place Cam Foot in module groove and
engage Zep Tool as shown.
Rotate the Cam Foot into place as
shown.
1 2