ZepSolar Zep System I, Руководство по установке

Страница: 45 / 56

ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc. PAGE 41 OF 50
Ground Zeps
Adjusting Spanner Sleeves
Engage Zep Tool with Ground Zep and rotate to lock into place.
Press the Ground Zep into the module
groove at the desired location.
Engage the Zep tool with the Ground
Zep.
Rotate 90 degrees CW to lock the
Ground Zep into place.
Use the Zep Tool to press Spanner Sleeves on Splices.
Place the Spanner Sleeve on the
Splice.
Press the Spanner Sleeve into place
with the handle end of the Zep Tool.
Use the Zep Tool to tap Spanner Sleeves flush.
Tap the Spanner Sleeve and Splice
with the head of the Zep Tool until the
Spanner Sleeve is flush with the end of
the Spanner Bar.
1 2
3