Zeppelin 1x8 Cabinet, Руководство по сборке

Страница: 34 / 52

34
d. With the baffle board resting between the three folds, find the line that is parallel and closest
to the remaining side of the baffle board.
108
Remove the baffle board and cut the grill cloth on
each of the folds crossing this new line.
109
ONCE AGAIN, DON’T OVER CUT. Fold and
crease along this line.
110
10. Make sure that the baffle board is rotated so that the black lines on the grill cloth will be vertical
when it is installed on the cabinet (notice the orientation of the baffle board mounting holes).
Alternatively, if you own a Percolator 2 Watt Tube Amplifier by Zeppelin Design Labs, orient the
cloth to match the pattern on the amp grill. While holding the baffle board (black side and t-nuts
down) onto the grill cloth, flip the assembly over and look at the front. The edges of the grill cloth
should wrap tightly around the baffle board, and all the lines on the cloth should be parallel or
perpendicular to the baffle board sides. Check the straightness of the lines (in both directions)
with your speed square and make sure the back of the grill cloth is flat against the front of the
baffle board. The process is illustrated with a grill cloth frame from the Percolator amp head.
111
108 109
110
111