Zeppelin 1x8 Cabinet, Руководство по сборке

Страница: 12 / 52

12
6. Use the Cleat template to poke two holes in one side of each cleat (Part # CA04.3).
17
As long as
you are careful, as shown, there is no need to use tape.
7. Installing the Cleats (Part # CA04.3): Place one of the sides
face down on your worktable. Stand one of the Port pieces
(Part # CA04.4 or 5) on edge and use it to space the cleat in
from the edge of the side.
18
(Place the cleat with the nail-marks facing
up.) Use the same port piece to space the cleat down from the end of the cabinet side.
19
Note
the cleat is cut a little short, so check it at both ends and center it on the cabinet side.
20
This is
much easier than it sounds. Finally, check the offset from the edge once more. Place the cleat a
little extra-far-in from the edge. Hold the cleat firmly in place with one hand.
17
18 19
20
TIP: See our
online video for a
demonstration of how easy
this is.