Zeppelin 1x8 Cabinet, Руководство по сборке

Страница: 30 / 52

30
4. Use the hammer and awl or nail to mark the locations of the four 7/32 holes near the edge of the
round cutout. Remove the template.
93
5. Use the drill and the 9/64 bit to drill the four holes in the corners of the board. If you have a drill
press, use it. Otherwise, take care to hold the drill as straight-up as you can. Hold the baffle firmly
down against a piece of plywood or a smooth work surface that you can drill into. This will give
you a cleaner hole on the bottom side of the board.
94
6. Change to a 7/32 bit and drill the four holes near the cutout.
95
93
94
95