Zeppelin 1x8 Cabinet, Руководство по сборке

Страница: 40 / 52

40
25. Double-check that you have marked the jack plate so you can put it back onto the port later in the
correct orientation. Remove the plate from the jack. Mount the 1/4” input jack (Part # JA05) in a
vise or clamp in a way that you can solder to the terminals.
132
Place the ribbed wire in the hole
of the negative lug (the one attached to the barrel of the jack). The wire should be placed in the
hole from the inside, rather than the outside; examine the picture.
133
Place the wire with writing
on it in the hole of the positive lug (the one attached to the tip of the jack).
134
Once again, the
wire goes in the hole from the inside. Solder both wires to the jack.
135-137
132 133
134 135
136 137