Zeppelin 1x8 Cabinet, Руководство по сборке

Страница: 17 / 52

17
22. Inspect the inside faces of the wood pieces for splinters or “blowout”: bits of wood standing above
the surrounding surface. Clean these off with a bit of 120-grit sandpaper.
39
23. Dry-fit the four sides as before, with the front edges down on the table. Apply some wood glue to
one end of the TOP. Smooth the glue out until it uniformly coats the end.
24. Fit two wood screws into the appropriate two holes of the mating SIDE piece.
42
Guide the tips into
the little pilot holes in the TOP piece. Set a clamp across the box as shown, barely snug. Carefully
line up the joint as before.
43
39
40 41
42 43