32
PRKB24C01AG & PRKB24C01AS-OD Use, Care, and Installation Guide
K E G E R ATO R &
B E V E R A G E C O O L E R
I N D O O R & O U T D O O R
P R E S R V ™
Operating Your Appliance
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
The kegerator has a temperature range from 32ºF-65ºF.
R
C
F
NOTE:
The kegerator is equipped with a temperature memory function. If power is suddenly lost,
the previous set temperature and light setting will be saved, and the cooler will return to this
setting once power is restored.
Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R “Compressor Running” light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 32ºF is the lowest
available temperature on this unit.
Interior Light (PRKB24C01AG only)
Press this button to cycle through the different colors for the control panel and internal lights.
ºC/ºF Selector (PRKB24C01AS-OD only)
Press this button to switch the display temperature between Fahrenheit and Celsius.
PRKB24C01AG can switch the display temperature by holding the Increase and Decrease
Temperature buttons at the same time for two seconds.
R
C
F
F
C
PRKB24C01AG (indoor)
PRKB24C01AS-OD (outdoor)
F
C
Leaving drinks in temperatures of 32ºF or below for prolonged
periods may cause bottles and cans to rupture.
WARNING
