30
PRKB24C01AG & PRKB24C01AS-OD Use, Care, and Installation Guide
K E G E R ATO R &
B E V E R A G E C O O L E R
I N D O O R & O U T D O O R
P R E S R V ™
Installation Instructions
Ź
To prevent damaging the door or door gasket, make sure the door is open at least 90-degrees
when pulling shelves out of the rail compartment.
Ź
The door opens to a maximum of 135 degrees with a door stop on the bottom hinge preventing the
door from opening further.
Installing the Glass Shelves
Please follow the instructions below to properly install the glass shelves. The kegerator comes with two
glass shelves that can hold 15 beer bottles or 15 12oz cans each, however, if you wish to install more
glass shelves to increase your overall capacity, the part number is PRKSHLF-02BG.
o
C
o
F
R
Converted to full beverage cooler with PRKSHLF-02BG
1. Completely open the kegerator door and unload any content that may obstruct the glass shelf
installation process.
2. The glass shelves have mounting hooks that can attach to both the left and right side of the
kegerator. Place the hooks into the mounting brackets as shown in the figure by slipping the hook
into the bracket hole, which will secure it in place.
3. Load back any previously removed content and close the kegerator door.
CAUTION
Max weight capacity of the glass shelf is 26.45lb.
Exceeding this weight may damage the shelf.
