15
14
PL
PL
EN
EN
only use the detachable supply unit provided with this
appliance.
This symbol means that the appliance is intended
to be supplied from a detachable supply unit.
The appliances contains batteries that are only replaceable
by skilled persons.
Plug must be removed from socket-outlet before cleaning
or maintaining the appliance.
Follow the charging the product instructions in order
to charge it. Due to the plastic housing of the vacuum
cleaner, keep the appliance away from all heat sources
(radiators, stoves, etc.).
Do not block the vacuum cleaner inlet and outlet openings!
Turn off the vacuum cleaner before replacing equipment.
This appliance is intended for use at a maximum altitude
of 2000m above sea level.
IMPORTANT WARNINGS
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not pull on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
authorized Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the
brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorized technical support service center may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc.), sharp objects (pins, pins, nails, glass, etc.),
incandescent objects (matches, cigarettes).
Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such
as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc.),
flour, cement, plaster, printer or photocopier toner, etc.
B&B TRENDS SL.
disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
INSTRUCTION OF USE
Note:
Before using the Cordless Vacuum cleaner for the first time, clean it with a soft, damp cloth and dry thor-
oughly.
Do not immerse the Cordless Vacuum cleaner in water or any other liquid.
1. Remove the vacuum cleaner from the carton, remove all stickers, shipping blocks, bags, and fillers.
2. Inspect the vacuum cleaner for any damage that may have occurred in transit. Contact your dealer if you
suspect damage.
3. Assemble the vacuum cleaner properly (see section: “Assembling the Vacuum Cleaner”).
4. Charge the battery (see section “CHARGING THE BATTERY”).
5. Make sure that your mains supply corresponds with the data on the charger’s name plate.
Assembling the Cordless Vacuum cleaner
Assembling the aluminum tube (Fig.1)
Fit the tube into the main body’s air inlet until it clicks into position.
Charging
Attention: Please ensure that it is fully charged (Fig.2) when using it for the first time. Please run out the
battery power before first charge to extend the product life (Fig.3)
Brush Introduction
Crevice nozzle tool
Remove dust on hard-to-reach area like window gap, bed feet, gaps between tables and chairs, etc. (Fig.4)
2 in 1 Brush Tool
Remove dust and hair on carpets and fleece. (Fig.5)
HOW TO USE
Preparing
Please confirm if the vacuum is fully charged before using. Please charge it for more than 5 hours before the
first use to ensure the normal operation of the product. Then select the appropriate brush head according
to the area need to be cleaner (check the „brush instructions”)
Battery install and remove
Press the release button and drag the battery to remove it. Press the release button and push the battery
to install it. (Fig.6)
Operating
Switch on/off and charge suction mode (Fig.7)
7a – press the suction mode switch to change the suction mode
7b – press the switch on/off to turn on, the machine will start to operate in standard suction mode. Press the
switch on/off again to turn off the vacuum
Содержание ZSVC925T WIKTOR
