![background image](http://html1.mh-extra.com/html/zelmer/ir8100/ir8100_user-manual_3403351073.webp)
73
IR8100-001_v01
8
If you want to achieve better effects, shift left
the steam
emission regulator
to the position
– this will bring you
increased steam emission speed.
9
The appliance is ready to use.
10
Keep the iron in a vertical position ca. 4 in (10 cm) away
from the fabric for a moment.
11
Press once
the steam emission button (1)
– steam is
emitted in large quantities from the openings located in the
front part of the iron.
12
If the folds are large, wait for a moment and press
the
steam emission button (1)
once again. Most of folds can
be removed completely if you repeat this operation 3 times.
13
In order to initiate steam emission it may be necessary to
press
the steam emission button (1)
several times.
14
As soon as you have finished the ironing, set the steam
emission level to ”
” by pressing
the fabric and
steam emission selection button
„
”.
15
Press
the on/off button
in order to switch off the
appliance.
16
Disconnect the steam generator from the power supply.
17
As soon as the iron is cooled down completely, empty
the
water reservoir (6)
and store it in a safe place in a horizontal
position.
In order to preserve high quality of steam do
not press the steam emission button more than
3 times after the pilot light has been switched
off.
The appliance emits steam at a high
temperature. Do not iron any clothes or fabrics
that are being worn by people or animals.
Do not direct the steam towards people or
animals.
While ironing, keep the distance of several
centimetres from delicate fabrics (such as
synthetic fibre, silk or velvet), otherwise the
fabric may be damaged.
Automatic switch-off
If the steam ironing function is not used for 10 min during
the ironing, the appliance will be switched to stand-by
mode. The display backlight will be switched off and
the
automatic switch-off indicator
blinks on the display. It is
accompanied by continuous blinking of the red and green
pilot light on the iron. In order to continue the ironing, just
move the iron or press the
on/off button
. The appliance
will be switched back to the previous settings and the iron
heats once again. Wait for ca. ½ min until the iron reaches
the temperature set before automatic switch-off.
5
Shift right
the steam emission regulator
to the position
.
6
The appliance is ready to use.
7
When
the steam emission button (1)
is pressed you will
see the steam symbol at the steam emission level indicator
blinking on the LCD display.
8
Press
the steam emission button (1)
in order to steam
iron. In order to initiate steam emission it may be necessary
to press
the steam emission button (1)
several times.
9
As soon as you have finished the ironing, set the steam
emission level to „
” by pressing
the fabric and
steam emission selection button
„
”.
10
Press
the on/off button
in order to switch off the
appliance.
11
Disconnect the steam generator from the power supply.
12
As soon as the iron is cooled down completely, empty
the
water reservoir (6)
and store it in a safe place in a horizontal
position.
Vertical steam emission
Always follow the producer’s recommendations
you see on the clothing item’s label.
This function enables the emission of
additional steam which facilitates folds removal
from delicate fabrics placed in vertical position
(hanging curtains or other clothes).
1
Unwind and straighten the terminal and the connector
cord.
2
Fill
the water reservoir (6)
(see: Filling the water).
3
Start the appliance (see: Starting the appliance).
4
Depending on the type of the fabric you want to iron,
select the steam emission level (from „
” to
„
” by pressing
the fabric and steam emission
selection button
.
Each time the button is pressed, you will hear
a sound signal emitted by appliance.
5
The steam boiler heating indicator
starts to
blink signalling that the steam boiler has started to heat.
If you press
the steam emission button (1)
, you will hear
a sound signal but no steam shall be generated.
6
The steam boiler heating indicator
stops
blinking (no longer displayed on LCD display) when the
selected temperature of the steam boiler is reached.
7
When the iron baseplate and the steam boiler are ready
to use,
the red pilot light
will be switched off and
the green
pilot light
will appear.
Содержание IR8100
