Zelmer IR8100, Руководство пользователя, Страница: 70 / 76

70
IR8100-001_v01
Hints for ironing
1
Sort out the articles to be ironed according to the type
of fabric. This will minimize the frequency of temperature
adjustment for different garments.
2 Test ironing a small area on the backside or inside the
garment if you are unsure about the type of fabric. Start with
a low tempera-ture and increase gradually.
3 Wait for about three minutes before ironing heat sensitive
fabrics. Temperature adjustment needs certain time to reach
the required level no matter it is higher or lower.
4
Delicate fabrics such as silk, wool, velour, etc. are best
ironed with an ironing cloth to prevent shine marks.
5 Read the garment labels and follow the
manufacturer’s ironing instructions which are often
shown by symbols similar to the following:
Temperature settings
○ Acetate
○ Elastics
○ Polyamide
○ Polypropylene
○ Polyester
○ Silk
○ Triacetate
○ Viscose
○ Wool
○ Cotton
○ Linen
Technical data
The steam generator technical parameters are included at
the name plate.
The steam generator is a 1
st
class appliance equipped with
a connector cord with protective conductor and a plug with
a protective contact. Connect it to a socket equipped with
a grounded socked.
The Zelmer steam generator is in compliance with the current
regulations.
The appliance meets the requirements of the following
directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electro-Magnetic Compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE symbol on the name plate.
Identification of parts
A
1 Steam emission button
2 Pilot light
3 Steam emission regulator
– steam is emitted from the openings placed in
the front part of the iron
– steam is emitted from all openings of the iron
4 Bend protector
5 Water inlet
6 Water reservoir
7 Water reservoir catch
8 Anti-cal refill container
9 Anti-cal refill (installed in the anti-cal refill container)
10 Water hardness tester
11 Steam generator base with thermal insulation
12 Cord catch
13 Connector cord hanger
14 Signal lamps (green – ready to work with steam, red
– heating of the baseplate)
15 On/off button
16 Water hardness selection button
17 Fabric and steam emission selection button „ ”
18 Fabric and steam emission selection button „ ”
19 LCD display
LCD DISPLAY – DESCRIPTION
A Water hardness
B Water level
C Steam emission level
D Steam boiler heating
E Automatic switch-off
F Replace anti-calc refill
G No anti-calc refill
H Temperature regulation
I Fabric type setting
A H
I
E C B D F G