VISUSCOUT 100-GA-GB-031219
51
Wireless
Set wireless connection ON from device menu to enable WLAN. When wireless
connection is enabled, the wireless symbol is shown on display next to the battery
level indicator. To view ‘WLAN SSID’ and ‘WLAN Password’, select wireless
info from camera menu.
When WLAN is enabled, the camera-specific access point is set up. Connect PC
to the created access point, that can be found from Windows Network & Internet
settings.
USB
Connect the camera to the PC with USB cable provided with the device. The
camera must be placed on the cradle to enable USB connection.
After the connection is enabled via WLAN or USB, open VISUSCOUT 100
Client. The camera in the network is shown on the list. Select the camera that you
want to connect and press ‘Connect device’ (figure below).
For the first time you connect the camera, you are directed to view and change
general and camera specific settings (figure below). Here you can specify the
location where the images from the selected camera will be downloaded and the
location where the patient list will be uploaded to the selected camera. For the
next time the camera connects automatically to the PC and captured images will
be automatically downloaded unless you change these settings.
Содержание VISUSCOUT 100
