Zeiss Crossbeam 340 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 134

background image

OK=p~ÑÉíó

fåëíêìÅíáçå=j~åì~ä=`êçëëÄÉ~ã=PQM

=

ÉåMOE`loF

=NP=çÑ=NPQ

p~ÑÉíó=ëìãã~êó

2.3. Safety summary

Follow the safety instructions given in this instruction manual. This is essential to protect yourself
and others against accidents and unsafe practices and to prevent damage. Do not deviate from
the instructions provided in this instruction manual.

This section summarises hazards and recommended safety procedures.

2.3.1. Hazards related to personal injury

Service tasks

DANGER

Danger to life: Hazardous voltage inside the microscope.
Only service engineers trained and authorised by Carl Zeiss are allowed to service the mi-
croscope.

Radiation
protection

X-rays are produced within the microscope during operation. This is unavoidable during operation
due to accelerated electrons by voltages up to 30 kV.

WARNING

Radiation hazard: X-rays are generated inside the microscope during operation.

Only authorised Carl Zeiss service engineers are allowed to service the microscope.
Do not remove any parts around column and chamber.
Observe all safety and X-ray protection regulations.

In Germany, the operation of the microscope is permission-free as the following requirements are
fulfilled:

•

The acceleration voltage is limited to 30 kV.

•

The local dose rate at a distance of 0.1 m from the accessible surface of the microscope does
not exceed 1 µSv/h.

•

A respective label is attached to the microscope.

Outside Germany, the user of the microscope has to comply with the local regulations of the coun-
try where the microscope is operated.

The microscope is equipped with several radiation protection devices, which ensure - under reg-
ular operation conditions - that the workstation operates in accordance with the German X-ray pro-
tection regulation (RöV) respectively the German radiation protection regulation (StrSchV) as well
as with the EC Directive 96/29/EURATOM.

«
...
11
12
13
14
15
...
»

Содержание Crossbeam 340







































































































































Отзывы:

Нет отзывов

Похожие инструкции для Crossbeam 340

Veriton Hornet N260G

Бренд: Acer Страницы: 22

Бренд: IBM Страницы: 158

Бренд: IBM Страницы: 160

Бренд: Texim Europe Страницы: 5

Бренд: Digital Equipment Страницы: 321

Бренд: Tandy Страницы: 129

Бренд: Intel Страницы: 10

Бренд: Vivo Страницы: 4

Бренд: Asus Страницы: 18

Бренд: Asus Страницы: 174

Бренд: Asus Страницы: 166

Бренд: Sharp Страницы: 83

Бренд: Sharp Страницы: 168

Бренд: TYAN Страницы: 33

Бренд: TYAN Страницы: 101

Бренд: Alpha Microsystems Страницы: 42

Бренд: Vivo Страницы: 5

Бренд: Bitfily Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды