Zeiss Axioskop 2, Руководство пользователя

Страница: 54 / 140

START-UP
Attachments and conversions Axioskop 2 / Axioskop 2
MOT
2-22 B 40-075 e 06/98
2.2.8 Changing the mechanical stage
(1) Fixed mechanical stage 75x50 R
a) Removing the stage
•
Unscrew 4 fixation screws (2-33/ 5 ) on the stage
carrier (2-33/ 6 ) using angled SW 3 Allen key (2-
33/ 4 )
•
Remove stage (2-33/ 1 ) from the stage carrier in
upward direction.
b) Attaching the stage
•
Attach stage (2-33/ 1 ) to stage carrier (2-33/ 6 ) in
such a way that the threaded holes
(2-33/
2 ) on the underside of the stage are
positioned above the openings of the stage
carrier (2-33/
3 ).
•
Insert four fixation screws (2-33/ 5 ) through the stage carrier from below and screw them in the stage
underside; use the shorter screws on the front.
•
Orient stage in x-y direction and tighten the fixation screws.
(2) Rotary mechanical stage 75x50/240° R
a) Removing the stage
•
Loosen screwing cap (2-34/ 2 ) of spring housing
with approx. 3 rotations.
•
Press stage to the front against spring pin
(2-34/
1 ), lift it off the stage carrier (2-34/ 3 ) at
the back and remove it in upward direction.
•
Tighten screwing cap (2-34/ 2 ).
b) Attaching the stage
•
Loosen screwing cap (2-34/ 2 ) of spring housing
with approx. 3 rotations.
•
Attach stage to the spring pin (2-34/ 1 ) via
dovetail groove.
•
Press stage to the front against spring pin and
lower its back in the stage carrier (2-34/
3 ), then
let go.
•
Tighten screwing cap (2-34/ 2 ).
Fig. 2-33 Changing the fixed mechanical
stage
1
2
3
Fig. 2-34 Changing the rotary mechanical
stage