Zeiss Axioskop 2, Руководство пользователя

Страница: 35 / 140

START-UP
Axioskop 2 / Axioskop 2
MOT
Initial start-up
B 40-075 e 06/98 2-3
2 START-UP
The Axioskop 2 / Axioskop 2
MOT
can be installed, converted and started up by the customer himself.
However, it is also possible to have the microscope installed or converted by Zeiss service staff against an
extra charge.
☞
Before installation and start-up of the microscope, make sure to carefully read the Notes on
instrument safety .
2.1 Initial start-up
2.1.1 Unpacking and installation of the microscope
The basic instrument is supplied in a polyethylene case in cardboard packaging.
It contains the following components: binocular tube, objectives, eyepieces, condenser, 12 V / 100 W
illuminator, microscope mat and various small parts, e.g. DIC slider, spare lamp, dust cover, tools bag.
The following components are factory-attached to the microscope stand: mechanical stage, specimen
holder, filter mount, technique modules and epi-fluorescence equipment with adjusting aid.
Further, optional accessories are supplied in a separate case.
•
Remove all components from the packaging
and use delivery note to check for
completeness.
•
Place instrument (2-1/ 1 ) on a vibration-free, flat
worktable on the microscope mat (2-1/ 2 ). The
footprint of the Axioskop 2 microscope support
is 500 mm x 400 mm (width x length).
•
Properly dispose of original packaging, or keep
it for storage or return of the instrument to the
manufacturer.
10
20
30
40
50
60
70
80
90
100
Fig. 2-1 Setting up the microscope