YSI WaterLog Series, Руководство пользователя

Страница: 69 / 174

Options for the GOES mode are as follows:
Off: The radio is disabled and no future transmissions will occur.
Self-Timed: The radio is set for Self-Timed transmissions only.
Random: The radio is set for Random Transmissions only.
Both: Both Self-Timed and Random Transmissions are enabled.
Next Self-Timed Transmission: Displays the time of the next scheduled timed transmission.
Time to Next ST Transmission: Displays the time until the next scheduled timed transmission.
Status: Displays the current GOES status including whether the GOES Radio is responding or
any errors that may be present in the current setup. To force a re-evaluation of the current status,
press the Update Status function button. Choosing a different Mode will also force a Status
update.
Address: This is the 8 character DCP (Data Collection Platform) address or ID assigned by
NESDIS. This is automatically transmitted with the data to the GOES satellite. The address
must be in capital letters and can be set by pressing the Edit button next to the label.
GOES Time: This option allows the user to set or check the time clock in the GOES Radio as
well as synchronize the System 5000 time to that of the GOES Radio. This is a different clock
TM
than that used within the System 5000 data logger. This clock must be set to universal standard
TM
time, while the clock in the data logger may be set to the local time or any other time desired.
GOES Radio Time: The GOES time clock in the radio should be set using its built-in GPS
system. At initial power up the radio will continuously try to acquire time from the GPS system
in order to set the time. Once time is set, the radio will try once a day for ½ hour to re-sync the
System 5000
Outputs 6-11
TM