YSI WaterLog Series, Руководство пользователя

Страница: 143 / 174

View Status Screen
The View Status screen shows the Tasks on the System 5000 , each with their most recent
TM
measurement date, time, and value, as well as the next measurement date and time. If new
measurements are desired for all listed Tasks, the Measure All function button can be pressed to
force a measurement of all the Tasks. If only a specific Task measurement is desired, select the
desired Task and press the Measure Task function button (highlighting a Task will cause the
Measure All function button to change to a Measure Task function button). Updates to the
values will be shown as new measurements are retrieved.
The View Status screen also appears when the View Status button on the front panel of the
System 5000
is pressed. Pressing and holding the View Status button for more than three
TM
seconds will initiate the action specified by the function button. If no Tasks are selected and the
Measure All function button is shown, holding the View Status button will cause all of the Tasks
to request a new measurement. To select a Task, press and release the View Status button.
Pressing the button again will scroll through the Tasks. To measure a selected Task, simply
highlight the desired Task, then hold down the View Status button for roughly three seconds.
After the last Task has been deselected, the function button will scroll to a Sleep command.
Holding the View Status button will then shut off the display to the System 5000TM, and
subsequently enter its sleep mode. Pressing the View Status button again will wake up the unit,
if asleep, or rotate the function button to the Measure All command, if already awake..
System 5000
System Setup - Inputs & Outputs 12-5
TM