YSI WaterLog Series, Руководство пользователя

Страница: 167 / 174

Wrong or Erratic Data:
1- Check the sensor Properties screen for possible errors.
2- Verify slopes, offsets, or custom functions.
3- Check battery voltage and all connections.
SDI-12 Communications
No SDI-12 Response:
1- Verify power to the System 5000 .
TM
2- Check all SDI-12 connections, including DATA and GND.
3- Check the pin out of the SDI-12 sensor for correct wiring.
4- Make sure all sensors have a unique address.
GOES Transmissions
GOES not transmitting:
1- Check power to the GOES Radio, do so under a load (e.g. a transmission).
2- See if the GOES time is correct, if it is stopped, it indicates power to the radio was lost,
stopping the clock. The radio will not transmit if the GOES clock is not running.
3- Check all antenna wires.
4- Check antenna alignment.
5- Use a power meter to measure the power output of the radio and the reflected power.
System 5000
Maintenance and Troubleshooting 14-3
TM