YSI WaterLog Series, Руководство пользователя

Страница: 61 / 174

Using an Existing Log File
Adding additional Tasks to existing log file configurations is a simple process and can be done
through the Add Output selection screen. From the Add Output screen, simply select Log To
File (
filename ) with the appropriate log filename and press the OK button to open the Log To
File Properties screen. This will automatically add the current Task to the existing log file
configuration. No further steps are necessary for the Task value to begin logging once Scanning
is Enabled from the Main Menu.
Log To File Properties
After selecting the Log To File Output, the following Log To File Properties screen will appear.
The log file name and file size will be displayed in the lower left box. If the file has not been
created yet (no logging has occurred), the Size will remain empty. The Add and Remove buttons
are available if an alternative log file is desired for logging. Using the Remove button will only
System 5000
Outputs 6-3
TM