YSI SonTek ADVField, Техническая документация инструкция

Страница: 51 / 228

SonTek/YSI
ADVField/Hydra Operation Manual (September 1, 2001) 39
RecordExtPress [YES|NO] [YES|NO] [YES|NO]
•
Default parameters:
NO NO NO
•
Without parameter: returns its current settings for each burst type.
•
When used with from one to three valid parameters, tells the ADV whether to record data
from an optional, external pressure sensor. See §1.3 for a description of burst sampling.
○
YES
tells the ADV to record external pressure sensor data for each velocity sample for
the selected burst types.
YES
increases the size of each sample by 3 bytes.
○
NO
tells the ADV not to record external pressure sensor data for the selected burst types.
•
This parameter is used only in deployment mode; it has no affect on real-time data collection.
•
If only one or two input arguments are specified, it does not change the settings for the non-
specified burst types.
•
Appendix 2 has a description of the data recorded based on the
Record
command settings.
RecordCTD [YES|NO] [YES|NO] [YES|NO]
•
Default parameters:
NO NO NO
•
Without parameter: returns its current settings for each burst type.
•
When used with from one to three valid parameters, tells the ADV whether to record data
from an optional CTD sensor. See §1.3 for a description of burst sampling.
○
YES
tells the ADV to record optional CTD data for each velocity sample for the selected
burst types.
YES
increases the size of each sample by
x
bytes, where
x
is dependent on the
type of CTD sensor being used.
○
NO
tells the ADV not to record CTD data for the selected burst types.
•
This parameter is used only in deployment mode; it has no affect on real-time data collection.
•
If only one or two input arguments are specified, it does not change the settings for the non-
specified burst types.
•
Appendix 2 has a description of the data recorded based on the
Record
command settings.
RecordLisst [YES|NO] [YES|NO] [YES|NO]
•
Default parameters:
NO NO NO
•
Without parameter: returns its current settings for each burst type.
•
When used with from one to three valid parameters, tells the ADV whether to record data
from an optional LISST-100 sensor. See §1.3 for a description of burst sampling.
○
YES
tells the ADV to record optional LISST data for each velocity sample for the se-
lected burst types.
YES
increases the size of each sample by 80 bytes.
○
NO
tells the ADV not to record LISST data for the selected burst types.
•
This parameter is used only in deployment mode; it has no affect on real-time data collection.
•
If only one or two input arguments are specified, it does not change the settings for the non-
specified burst types.
•
Appendix 2 has a description of the data recorded based on the
Record
command settings.