Young Electric E-Explorer Cruiser, Руководство пользователя

Страница: 63 / 79

63
Rear Derailleur Adjustment
-
Shift rear shifter to largest number and place chain on smallest sprocket.
-
Vertically line up smallest sprocket and guide pulley by adjusting high limit screw.
-
Turn high limit screw clockwise to move pulley away from frame or counterclockwise to
move pulley towards frame.
-
Shift through gears, ensuring each gear shifts quietly and without hesitation. If necessary,
use barrel adjuster to fine-tune each gear by turning it the direction you want chain to go.
For example, turning clockwise will loosen cable tension and move chain away from wheel,
while turning counterclockwise will tighten cable tension and direct chain towards wheel.
-
Shift rear shifter to gear one and place chain on largest cog.
-
Adjust low limit screw in small increments until guide pulley and largest cog align vertically.
Turn low limit screw clockwise to move pulley closer to frame; counterclockwise to move
pulley away from frame.
-
Again, shift through each gear several times, ensuring each gear is achieved smoothly. It
may take several attempts before rear derailleur and cable are adjusted properly
CAUTION
Ensure bolts are tightened securely and chain does not fall off.