Young Electric E-Explorer Cruiser, Руководство пользователя

Страница: 45 / 79

45
Charger Connection
a. Put the battery on a solid non-flammable surface when not in use. To avoid damage to charge
port and plug connection to socket, the battery and charger should be laid flat on surface, so
ports and plugs are horizontal.
b. To check present battery capacity, turn on the system, and information will be shown on the
instrument. Unplug battery and charger when not in use.
c. Remove the rubber cover on the charging port located on the battery housing.
d. Connect the DC output plug from the charger to the charging port on the battery.
e. Plug charger into a power outlet. Charging will be indicated by a red light. A completely
discharged battery will require about 5.5 hours to be fully charged. After charging is complete,
the indicator on the charger shows green light. There is not any switch on the charger.
f. Disconnect the battery when it is completely charged.
Do not push the pedals when the battery is charging on the bicycle. The charge socket on the battery
may be damaged. The battery can be charged when on or off bicycle but must not be moved during
charging cycle.
⚠
WARNING
Charge the battery only with the charger originally supplied with the bike or a replacement
Young Electric charger. Never use an aftermarket charger which can cause battery to
overheat and explode, resulting in battery damage, property damage, severe injury, and/or
death.