51
Walk Assist Function
When speed is 0, Long P
ress “-” button to enter walk assist mode.
The motor outputs power according to the set speed and controls
the actual walk speed. The display shows the walk assist icon
and the real-
time speed. Release “-” button or press any button to
exit walk assist mode. The motor is turned off, and the display
goes back to the Basic Interface/Home Screen. Walk Assist
Interface shown right.
Battery Power Indicator and Assist Power Output
Battery power information is divided into battery bar indication and remaining percentage indication.
When battery power is normal, battery capacity is divided into 5 bars. Before communication is
established, the battery percentage is not displayed, and the power bar is full and blinks at 2Hz. After
battery info is acquired, power bar will stop blinking, and displays the power percentage. If
communication is not successful within 3s, it will stop blinking and no power percentage will be
displayed.
After battery capacity is lower than 5% or the voltage is lower than low voltage value, display will
enter the low-voltage mode. In this mode battery level shows level 0 and border blinks at 1Hz, with no
power output from the motor, and disabled assist level switch. Power assist level is displayed as OFF
or 0. To get out of low-voltage mode, reset, and increase the voltage above low-voltage value and
battery capacity above 5%.
Содержание E-Explorer Cruiser
Страница 72: ...72 SERVICE PARTS...
