Young Electric E-Explorer Cruiser, Руководство пользователя

Страница: 59 / 79

59
Handlebar
The height of the handlebars is a personal choice. To adjust handlebar height:
-
Using Allen wrench and box wrench, loosen the stem bolt.
-
Carefully, tap bolt down using rubber mallet.
-
Manually raise or lower the stem to the desired height, then retighten bolt.
⚠ WARNING
Do not extend any components of bike beyond any minimum insertion marking etched
into the components. Ensure that all hardware is properly tightened, and components are
secured before moving onto the next step. Failure to do so could result in damage to bike,
property, severe injury, or death.
⚠ WARNING
-
Never ride with seat post raised beyond “Maximum Height Mark,” which is stamped on side
of seat post. Always keep a minimum of 2-
1/2” of seat post in seat tube. Failure to do so
may result in damage to bike and/or personal injury or death and may void warranty.
- Be sure to tighten seat clamp/seat adjustment bolt properly, before first use. Failure to do
so may cause damage to the bike, property, loss of control, a fall, severe injury, or death.
Regularly check seat clamp for proper tightness.